VEVOR Retractable Air Hose Reel, 1/2 Inch x 50 FT Rubber Air Hose Max 300PSI, Auto Rewind Air-Compressor Hoses Reel with 5 ft Lead in, Ceiling/Wall Mount Heavy Duty Steel Double Arm

VEVOR 50 ft Retractable Air Hose Reel 1/2 Inch Rubber for Organized, Clutter-Free Workshops

The VEVOR 50 ft retractable air hose reel is a clean, professional way for garages, workshops, car shops, and DIY spaces to deliver air. It eliminates tangled hoses, floor trip hazards, and the constant frustration of having to wind and store a heavy rubber hose by hand after every use. You can put the reel on the ceiling or the wall to keep your floor clear. When you’re done with a job, the auto-rewind feature neatly winds the 50-foot hose back up with just one light tug.

The 1/2-inch rubber hose allows high-demand pneumatic tools to operate at full capacity. The 50-foot working length and 5-foot lead-in give you a total reach of 55 feet from the mount point to your work area. With this long reach, you don’t have to move your compressor to reach big shop floors or long vehicle bays.

1/2 Inch x 50 ft Rubber Air Hose with 5 ft Lead-In for Maximum Reach & Airflow

This retractable air hose reel features a 1/2-inch hose diameter, providing a larger internal bore that high-volume air tools need for steady, unrestricted airflow at full working pressure. For long lengths, wider-bore hoses reduce pressure drop better than narrower 3/8-inch hoses. This makes this reel a strong choice for tools that use a lot of air, like impact wrenches, air ratchets, spray guns, and sanders.

The extra 5-foot lead-in hose goes from the reel to the connection point on your compressor. This lets you place the reel farther away from the compressor without reducing the length of the working hose. This means you can still use all 50 feet of the hose, no matter where the reel is located relative to your air source (ceiling or wall).

Max 300 PSI Hose Working Pressure Rated for 23°F to 113°F Operating Temperature Range

This 50 ft retractable air hose reel features a rubber hose rated for up to 300 PSI, which is well beyond what most shop air compressors can handle (90 to 175 PSI). The high-pressure rating provides a large safety margin when using the hose in the workshop and ensures consistent performance when connected to industrial compressors with higher outputs.

You can use this reel year-round in sheds that aren’t heated, outdoor workshops, and places that get cold in winter, since it is rated for temperatures between 23°F and 113°F (-5°C to 45°C). During this temperature range, the rubber hose material stays flexible, so it doesn’t get stiff and hard to handle as some hoses do in cold weather.

50 ft Retractable Air Hose Reel: Auto-Rewind Mechanism with Ratchet Lock & Adjustable Stopper

This retractable air hose reel features an automatic return mechanism that uses a spring. With just one light pull on the hose, the system retracts it smoothly and winds onto the reel drum. During the rewinding process, guide rollers evenly distribute the hose across the drum width, preventing bunching, overlapping, or uneven winding that can lead to early hose wear and retraction problems over time.

The built-in ratchet locking system and flexible stopper work together to keep the hose at any length you want without having to tighten it manually. Once you lock the hose in place, you can pull it to the position you want to work from. The hose will stay in place while you work. If you gently pull it back, the auto-rewind will start right away.

Heavy-Duty Steel Dual-Arm Design with 180° Swivel for Ceiling & Wall Mount Installation

For this 50 ft retractable air hose reel, the two-arm steel frame provides balanced structural support to handle the weight and movement forces generated by a heavy 50-foot rubber hose during repeated cycles of extension and contraction. Each arm holds one side of the reel drum, so the load is evenly distributed across both mounting points rather than being supported by a single-side mount.

Because it can swivel 180°, you can turn the reel drum to point the hose outlet anywhere in your workshop without having to move the whole mounting bracket. With the included hardware, you can place the reel on ceilings, walls, or workbench posts. This means you don’t have to create custom mounting solutions for each setup.

Kink-Resistant Rubber Hose with Spring Guard, Rubber Sleeve & 1/2″ NPT Brass Fittings

The rubber hose on this retractable air hose reel helps resist kinking that stops airflow, so you don’t have to stop what you’re doing to straighten the hose by hand. The built-in spring guard at the reel exit point prevents the hose from bending sharply where it hits the reel drum, where most hose failures start.

The inlet and outlet connectors have 1/2″ NPT brass fittings that make a secure connection to your compressor and air tools. Standard NPT threads typically require thread sealant or tape. The brass construction prevents corrosion and thread damage, even after years of frequent connecting and disconnection. These fittings are safe for daily shop use for tire inflation, spray painting, impact driving, and all other pneumatic tasks.