VEVOR Pop Rivet Gun Kit, with 230 Blind Rivets, Two-Handed Riveter with 5 Interchangeable Nosepieces, 5 Drill Bits, and a Carrying Case, Manual Riveting Tool for Metal, Automotive, Home, and DIY

5 Interchangeable Nosepieces from 3/32″ to 1/4″ for Versability

With its 5 interchangeable nosepieces, the manual pop rivet gun can handle rivets from 3/32 inch to 1/4 inch in size. It comes with nosepieces that are 3/32″, 1/8″, 5/32″, 3/16″, and 1/4″ in size to fit most rivet diameters. You do not need any extra nosepieces for this range to work in most car, sheet metal, and general fastening situations. Each nosepiece has a clear size mark. Hence, it is easy to find when switching tools or working on a project.

For small, delicate jobs, the 5 nosepieces can use 3/32″ rivets. For heavy-duty jobs, they can use 1/4″ rivets. The gun’s size makes it useful for fixing car bodies, HVAC ductwork, metal roofing, and other do-it-yourself jobs. This helps reduce slipping or dropping during the installation of each nosepiece, as the nosepiece holds the rivets tightly in place. The design is interchangeable, so you can quickly switch between sizes to meet the needs of different jobs.

Manual Pop Rivet Gun with 230 Rivets and 5 Drill Bits for Instant Use

The pop rivet gun comes with 230 blind rivets included. There are different sizes of rivets in the selection to match the five nosepieces, so you can use them with the matching nosepiece. Along with rivets, the kit includes five drill bits for drilling sheet-metal holes that are the right size for the rivets. All of the parts are kept safe in a tough carrying bag while they are being stored and moved between projects or job sites.

With 230 rivets, you have a good amount to finish small to medium-sized projects or learn the right way to rivet. The drill bits make clean, accurate pilot holes that allow rivets to fit without damaging or pushing the material’s edges. The carrying case organizes the gun, nosepieces, screws, and drill bits into a small, easy-to-carry package. The case keeps small parts, like nosepieces, from getting lost and keeps the tool from getting damaged while it is being moved.

Die-Cast Aluminum Alloy with Reinforced Carbon Steel Construction for Durability

The die-cast aluminum material used to make the manual pop rivet gun makes it strong without being too heavy. Due to its aluminum construction, the tool is light, so your arms will not get tired during long rounds of riveting many fasteners. To ensure the longest life under the high forces generated during rivet setting, critical internal parts are made of reinforced carbon steel.

Even after thousands of riveting rounds on tough materials, the parts made of reinforced carbon steel resist wear and bending. When used outside or in wet situations, the aluminum alloy body does not rust or corrode. Under the mechanical stress of pulling rivet mandrels, the materials do not crack, bend, or break over time.

Manual Pop Rivet Gun with Thickened TPR Handle for Non-Slip Fatigue-Free Grip

The thicker TPR rubber handle on the pop rivet gun makes it easy to hold and prevents it from slipping while you use it. The soft, cushioned TPR material helps keep your hands from getting tired when installing multiple rivets at once. When you squeeze the handles together, the thicker design relieves pressure on your hands and helps prevent soreness after long use.

The TPR grip material stays comfortable even during long projects that require installing many rivets in sheet metal or car panels. The non-slip surface keeps the handle from turning or moving in your hand while you squeeze it to set rivets. The soft material protects your palms and fingers from discomfort caused by repeated squeezing. The thicker design gives you enough gripping surface area to use your whole hand.

Tool-Free Nosepiece Change with On-Body Spare Storage

You do not need tools or screwdrivers to change the nosepiece of the manual pop rivet gun between the 5 different sizes. For quick size switching, you just unscrew the old nosepiece by hand and put in the new one. You can store the extra nosepieces right on the body of the rivet gun, in dedicated slots that make them easy to access while you are working.

With the tool-free nosepiece system, you do not have to waste time looking for special tools to change sizes in the middle of a job. If you store extra nosepieces on the gun’s body, you can quickly access the right size. The storage slots keep the nosepieces in place so they do not fall out or get lost between jobs or during movement.

Built-In Mandrel Collector with Quick-Disassembly Design

The pop rivet gun features a built-in mandrel collector that neatly holds used mandrels after installing the rivets. To keep your work area clean, this collector collects mandrel stems that pull through rivets as they break off. During riveting, the collection bucket keeps used mandrels from scattering across the floor or workbench. Instead of picking up each mandrel after each rivet, you empty the collector every so often when it gets full.

As soon as you are done riveting, the mandrel collector eliminates the need to pick up spent mandrel stems from the floor. You can quickly take the gun apart if a rivet gets stuck or a mandrel jams, thanks to the quick-disassembly feature. You do not have to go through much trouble to clear the jam; you can put the tool back together in seconds. The design supports smooth riveting and easier jam clearing.