VEVOR Plate Compactor, 6.5 HP 196CC Gas Engine, 5600 VPM Vibrating Ground Rammer, 2360 lbs Compaction Force, 20.1 x 15 in Plate, Walk Behind Compactor for Paver Landscaping, Asphalt, Foundation, Soil

Vibratory Plate Compactor with 2360 lbs Force & 10.5 kN Compaction Power

The VEVOR vibratory plate compactor applies up to 2360 lb (10.5 kN) of compaction force, making the ground denser and more stable across a wide range of surfaces. This force output is designed to meet the needs of professional construction, foundation preparation, and pavement base work, where soil stability is essential.

This machine presses down hard on layers of gravel, sand, and compacted soil at 10.5 kN, eliminating air pockets and weak spots that cause settling over time. This compaction rating ensures that the ground beneath can support the weight of the surface material before it is put down. It is important for contractors who work on residential driveways, commercial paving beds, or structural foundations.

6.5 HP 196CC Gas Engine Reaching 5600 VPM for High-Frequency Ground Tamping

This compactor has a 196 cc engine that makes 6.5 HP and can reach 5600 vibrations per minute (VPM). It delivers high-frequency vibrations that penetrate into compactable material layers. The high VPM rate works best on granular bases like crushed limestone, decomposed granite, and sandy subsoils.

The EPA-certified engine runs on unleaded gasoline and is tuned to burn fuel efficiently, helping reduce exhaust emissions while maintaining stable power throughout the operating cycle. This certification directly helps contractors working on public projects or sites regulated for environmental reasons, ensuring their equipment is compliant without adding extra paperwork or modifications.

20.1 x 15 Inch Plate Covers 4,507–6,791 Sq Ft Per Hour on Any Terrain

This compactor has a wide, stable base thanks to its 20.1 x 15-inch steel compaction plate. This plate evenly distributes the force across the plate’s surface. Depending on soil type, compaction depth, and operator speed, this shape allows the machine to cover 4,507-6,791 square feet of ground per hour.

This range of productivity makes it suitable for both small residential jobs and larger commercial paving or landscaping projects. The wide plate contact area also cuts down on the number of times you have to go over the same area to reach the target density. It saves time and fuel on each project without affecting the uniformity of the compaction across the treated surface.

82 ft/min Travel Speed Maximizes Productivity Across Paver & Asphalt Applications

This vibratory plate compactor moves quickly across paver, asphalt, and soil surfaces at 82 ft/min. The operator does not necessarily have to slow the machine down to maintain compaction quality. This speed rating puts it above average for walk-behind compactors with the same amount of power.

Faster travel speeds mean that crews can finish time-sensitive paving and foundation work in shorter project windows because they need less time per square foot of compacted area. For asphalt repair patches, parking lot sub-bases, and municipal walkways, the combination of high travel speed and 5600 VPM vibration output means that fewer passes are needed, the operator gets less tired, and the project is finished more quickly.

Non-Slip Handle Built for Full Control at 5600 VPM Operating Vibration Levels

When it runs at 5600 VPM for extended periods, substantial vibration can be transmitted to the operator’s hands and arms. The handle on this vibratory plate compactor won’t slip, even when it’s hot outside and sweat makes it harder to grip.

The handle’s shape keeps the machine from slipping and helps the operator steer it accurately along paving edges, around obstacles, and through tight spaces in corridors. For landscaping and construction workers who spend many hours a day behind the machine, a secure handle that reduces vibration lowers their overall hand-arm vibration (HAV) exposure and makes it safer to use for longer periods.

2.5 L Fuel Tank & 0.5 L Oil Capacity Enable 40-Minute Continuous Operation Cycles

The 2.5-liter fuel tank is the right size for the 196CC engine’s full-load consumption rate, allowing about 40 minutes of continuous operation per fill cycle. It is the longest time the engine can run continuously at high RPM without damaging itself. This time frame aligns well with the standard crew rotation schedules on active construction sites.

The engine’s 0.5-liter oil capacity lubricates the internal parts during each operating cycle, helping keep the 6.5 HP powerplant at safe levels of heat and friction. Regular oil checks at this level and using 95-octane fuel will help keep the engine from wearing out too quickly and maintain steady VPM output throughout the machine’s service life.

Walk-Behind Vibratory Plate Compactor Rated for Highways, Railways & Municipal Roads

The VEVOR compactor can be used on a wide range of projects, including construction, highways, railways, and municipal administration. It can work on surfaces like dirt, gravel, lawn sub-bases, and asphalt overlays. Because it can be used for so many different things, contractors who work on a wide range of projects year-round will find it useful.

Its walk-behind design lets the operator control its movement in places where self-propelled or ride-on equipment can’t work well, such as narrow trench backfills, road edge repairs, and tight paving areas. The thick steel compaction plate protects the machine’s structure from wear and tear when it is used on rough aggregate materials, so it can be used on different types of terrain without needing to replace the plate often.