VEVOR Mechanical Keyless Entry Door Lock, 2.0 Code Upgrade, 4-7 Digits Code, Single-Sided Push Button Combination Keypad Door Lock with Handle, Auto Locking, for Indoor or Outdoor, Oil-Rubbed Bronze

Oil Rubbed Bronze Finish for Indoor and Outdoor Aesthetic Appeal

This lock’s oil-rubbed bronze finish gives it a classic, timeless appeal that complements both traditional and transitional exterior and interior design styles, yet remains in place in a contemporary house. The finish is applied to a zinc alloy body with a rust-proof coating, ensuring the aesthetic quality endures for a long time when exposed to rain, humidity, and UV rays outdoors.

The robust zinc alloy construction and oil-rubbed bronze finish offer the lock a premium appearance that is consistent with front door hardware. Even with continuous daily use, its scratch-resistant surface helps keep it looking polished and clean. This finish provides the appearance and durability required for long-term satisfaction for homeowners and property managers seeking security gear that enhances rather than diminishes the property’s curb appeal.

Simple Screwdriver Only Installation for Home and Office

The majority of homeowners and property managers can install this lock without expert assistance because it simply requires a screwdriver and does not require a locksmith, specialist tools, or complicated wiring. The most popular door combinations are covered by the included hardware, spindles, and screws, and the installation template eliminates the need to guess when marking hole locations.

The thick backing plate reduces the visible hole on the door surface, providing a neat, polished appearance, and the lock is compatible with both wooden and metal doors. This simple installation procedure makes the entire setup possible in a single, brief session for anyone upgrading an old lock or installing a new one on a garden gate, shed, garage, or indoor room door.

Battery Free Operation with Push Button Combination for Reliable Daily Use

These mechanical keyless entry door locks operate entirely without power, making them unaffected by signal interference, power outages, and battery failure, unlike electronic keypad locks that rely on batteries, wiring, or internet access. The lock functions consistently regardless of the installation environment’s temperature, humidity, or electrical conditions; there is nothing to charge, replace, or program via an app.

For exterior gates, shed doors, garage entrances, and any other site where installing power lines is problematic, or where freezing temperatures could quickly deplete batteries, this battery-free design is especially useful. Fully mechanical keyless entry door locks are dependable for users in harsh regions, regardless of the temperature, from below freezing to extremely hot summer temperatures.

Auto Locking Feature for Hands Free Security After Entry

This lock’s auto-locking mechanism ensures the latch secures without the user having to physically crank the handle or remember to lock after each use. This feature is particularly useful for high-traffic gateways where people constantly pass through and often forget to lock, posing a serious security risk.

In combination with the push-button system, the auto-lock feature re-secures the door after entry. This smooth auto-engage behavior eliminates a frequent point of failure in regular security procedures for homes, rental properties, and commercial spaces where dependable locking is crucial.

Hold Open Mode for High Traffic Hours and Easy Passage

During specified high-traffic times, such as business opening hours, deliveries, or family get-togethers, a built-in hold-open mode keeps the door freely passable without requiring repetitive code entry for each person. Without the need for additional tools or settings changes, access control may be immediately restored when traffic decreases by just entering the code to return the lock to secure mode.

Because of their dual-mode capabilities, mechanical keyless entry door locks are especially helpful for shared access points, small businesses, and rental homes where access needs vary throughout the day. There is no need to install any additional hardware, as the existing keypad handles the entire transition between pass mode and security mode.

Cuttable Spindle and Two Latch Sizes for Wide Door Compatibility of Mechanical Keyless Entry Door Locks

This lock comes with a cuttable spindle that adjusts to door thicknesses between 1.4 and 2.5 inches, covering the full range of typical residential doors, both inside and out, without the need for additional hardware. Regardless of the door type, two latch sizes, 2.3 inches and 2.7 inches, accommodate varying door depths and ensure a safe, well-fitting latch bolt.

The handle orientation can be adjusted during installation to match the direction the door opens, and the lock is compatible with both left- and right-hand door configurations. Because of its versatility, the lock is a sensible option for installers who need a single device that can handle a variety of door types across a house, business, or property without having to source different models for each use.

Mechanical Keyless Entry Door Locks with 2.0 Code Upgrade for Direct Panel Programming

The VEVOR mechanical keyless entry door locks feature a 2.0 code upgrade that allows users to update their entry code directly through the handle and keypad without removing the lock from the door. The lock is easy to operate even in low light, thanks to the clear button-press feedback and the C key, which allows for rapid corrections during code entry. Compared to traditional mechanical locks that require complete disassembly to change the combination, on-panel programming saves substantial time.

The 2.0 system’s capability provides an extra layer of security against code-guessing for any-order code entry, allowing the same buttons to be pressed in any order as long as the proper digits are entered. Users can choose from a variety of code-complexity options to meet their unique security needs, including support for 4–7-digit codes that use digits and the C and Z buttons.