VEVOR House Floor Jacks, 2 Pack 54-150 Inch Height Range, 11200 lbs Max Load Capacity, Adjustable Support Beam Basement Jack Post Pole for Leveling, Lift Steel Telescoping Post for Temporary Support

11200 lbs Load Capacity Makes This Floor Jack for House Handle Any Heavy Lift

The VEVOR floor jack for houses can lift up to 11,200 pounds (5,080.23 kg) per jack. This feature makes it a reliable way for homeowners and contractors to support heavy beams, floor joists, and structural columns. That load rating is good enough for most home leveling and repair jobs, and you don’t have to worry about the post bending or breaking under pressure.

Each jack in this two-pack can hold 11200 lbs on its own. It means both units can be used simultaneously over a wide area for jobs that require support along a beam or on a sagging floor with multiple contact points. That much space makes the two a practical, cost-effective choice for bigger jobs rather than renting several single posts.

54″–150″ Adjustable Height Range Covers Every Floor Jack Application

This floor jack for house can lift things from 54 to 150 inches (1372 to 3810 mm) high, which offers a wide adjustment range. It can handle everything from low crawl spaces to high basement ceilings without changing tools. That range is large enough to accommodate most residential and light commercial building types in a single flexible unit.

With that range built into a single post, contractors can bring this 2-pack to a job site and make adjustments on the spot, instead of guessing which heights are needed ahead of time. The post can be extended or shortened to fit any support point, whether it’s a standard 8-foot ceiling or an older home with unusually high or low clearances. No special adapters or add-on extensions are needed.

Q235 Steel Telescoping Post Built Tough Enough for Long-Term Structural Use

Each jack has a telescoping pipe made of Q235 carbon steel, a structural grade with high yield strength and consistent performance under heavy loads over time. This material keeps the post straight and stiff even at its maximum load, preventing the gradual bending or creeping that occurs with cheaper steel grades under heavy loads.

Basements and crawl spaces are often damp and humid, which is detrimental to metal support equipment because it causes surface corrosion. Q235 performs reliably in these conditions, and the protective finish helps resist corrosion. These posts can remain in place for a long time during renovation work without losing structural integrity or developing weak spots at the welded joints.

Eight Lock Pins Provide Maximum Safety When Adjusting This House Leveling Jack

Most single-post jacks have only two lock pins, but this house floor jack comes with eight lock pins in two packs, giving you four pins per post for a more stable multi-point locking setup. Each pin passes through the telescoping pipe at a set height, locking the post in place and preventing it from accidentally retracting when weight is applied from above.

You don’t need any tools to use the lever-based height adjustment. Just turn the lever to smoothly raise or lower the post to the desired height, then insert the pins to keep it there. The setup process is quick because it’s easy to change and features multiple pins to lock it in place, while maintaining key safety features.

Integrated Welded Base Plate Means This Floor Jack Installs in Minutes

The base plate on each post is permanently attached using a welding process that fuses it to the main pipe during manufacturing. That eliminates the loose or bolted base connections common on cheaper posts. If the fasteners wear out or come loose over time, the plate can move or come apart under load.

There are minimal steps to set up the jack, as the base comes pre-welded and ready to go. Users put it in place, raise it to the right height, and drop in the lock pins. The whole thing takes only a few minutes, even for people who have never used structural support equipment.

Adjustable Support Beam Jack Post Works Across Beams, Patios, and Construction Sites

This adjustable support beam jack can do more than just level basement floors. It can temporarily hold things up on patios, decks, and open construction frames where a reliable, adjustable-height post is needed while permanent structural work is completed. The 2-pack’s flexibility makes it a good thing to have on hand for a wide range of projects, rather than just one.

The jack keeps framing members in place while footings cure or permanent posts are set, which is especially helpful for building decks and patios. It keeps the structure level and stable throughout. The steel construction can withstand outdoor conditions without degrading quickly, and the small telescoping profile makes it easy to move between work areas on a larger site.

2-Pack Floor Jack for House Delivers Better Value for Multi-Point Support Jobs

Getting this floor jack for house as a two-pack makes sense for jobs that need support at more than one point along a beam or floor joist at the same time. Instead of buying two separate units for a higher total cost, the pack comes with matched posts that are all the same height, build quality, and load rating from the start.

Having two identical posts makes leveling easier because both units behave identically when adjusted and locked. That consistency is important when working under a long beam, because uneven support from posts that don’t match can cause tilt or stress concentrations that make repair work above more difficult.