VEVOR Fiber Fusion Splicer 6 Motors, Core & Clad Alignment Fibers Optic Splicer with 6s Fast Splicing and 13s Heating, 5″ Touch Screen, 3 in 1 Fiber Holder, 7800mAh Battery for SM MM DS NZDS Fibers

6-Motor Core & Cladding Alignment for Ultra-Precise Splicing

To maintain the fibers in the proper location, the VEVOR fusion splicer fiber optic uses six powerful motors. To maintain alignment throughout the splice, these motors guide the cladding and core. When you melt and join the fiber, this precise control helps it remain stable and reduces the possibility of errors. The system maintains extremely low loss, as low as 0.01 dB with multimode fiber, and works with a variety of fiber types.

In real time, the alignment system also verifies the fiber location. It maintains the accuracy and cleanliness of the fusion splicer fiber optic point by adjusting the angle and placement as needed. Long-distance lines, rigorous network initiatives, or jobs where signal loss cannot be allowed will benefit from this functionality. It increases your control, accuracy, and confidence in the outcome.

Rapid 6-Second Splicing and 13-Second Heating for High-Efficiency Workflow

You can do more tasks in less time with this fusion splicer’s quick work cycles. It heats the protective sleeve in about 13 seconds and completes a splicing cycle in just 6 seconds. You may finish lengthy fiber lines or repair jobs more quickly with this fast procedure.

Additionally, the short cycle time is useful for urgent repairs where every second counts. You need a tool that works quickly and remains stable when a line goes down. With this splicer, you can restore connectivity for enterprise networks, FTTH projects, security systems, and telecom lines.

5-Inch High-Definition Touch Screen with 200x/320x Dual-View Display on Fusion Splicer Fiber Optic

Even novice technicians can easily operate this device thanks to its 5-inch HD touchscreen. It provides easy access to all settings and a good view of the fYou can use a dual 200x view to examine both ends simultaneously, or apply 320x magnification to observe the fiber core along either the X or Y axis view.

You can navigate menus quickly thanks to the touchscreen’s fast response. With a few taps, you can switch modes, monitor heating progress, and review splicing results. Because everything you need is visible on a single screen, this clear presentation lowers errors.

Versatile 3-in-1 Fiber Holder Compatible with SM, MM, DS, and NZDS Fibers

This fusion splicer fiber optic is simple to operate with a variety of fiber types, thanks to its 3-in-1 fiber holder. It is compatible with bare fiber, patch cables, pigtail fiber, SM, MM, DS, and NZDS. You do not have to switch holders for different jobs thanks to this helpful feature. To keep fibers steady during splicing, the holder grips them securely.

Installers who operate with numerous networks will also find this design useful. Switching between fiber types does not require any additional equipment. It consistently provides a firm, stable fit and performs well in both lab and field settings. You can complete tasks more quickly and with fewer tools in your toolbox thanks to this adaptability.

Built-In VFL and OPM Functions for Accurate Loss Testing and Line Verification

The integrated Visual Fault Locator (VFL) facilitates the identification of fiber cracks, bends, or breaks. It highlights trouble spots immediately by shining a red light through the cable. This helps avoid line failure later on by allowing you to address problems before the splice. After the splice, the Optical Power Meter (OPM) helps measure loss and verify signal strength.

You do not need additional testing equipment because the machine comes with these two tools. From a single machine, you can test, repair, splice, and inspect the line quality. This streamlines the workflow and saves time. Additionally, it helps guarantee that your connection is reliable and operational.

Long-Lasting 7800mAh Battery on Fusion Splicer Fiber Optic Supporting Up to 260 Splicing Cycles

You can work for extended periods of time without needing to recharge thanks to the 7800mAh battery. On a single full charge, you can finish up to 260 heating and splicing cycles. For remote or outdoor work where power outlets are few, this extended duration is helpful. Additionally, it can handle long shifts and complex projects with many fiber joints.

From beginning to end, the heating and splicing performance is constant due to the battery’s consistent power supply. It keeps your work flowing smoothly and lessens disruptions. The robust battery enables you to confidently complete the task whether you are in the field, inside a building, or on a tower site.

Rugged Shockproof and Dustproof Design for Demanding Field Environments

Built for hard field work, this fusion splicer endures. The outer casing shields the inner components from drops and bumps and is shockproof. When working outside or in construction settings, it is crucial that dustproof construction keeps dirt out. The tool’s sturdy construction ensures its dependability even in challenging environments, such as dusty rooms, windy areas, or busy construction sites.

It is also convenient to carry due to its small size. Its robust build protects it during transport. The machine’s durable design extends its lifespan and helps you avoid expensive repairs. Installers who operate in hectic, demanding conditions can use it daily.

Complete All-in-One Fusion Splicer Kit with Cleaver, Strippers, and Accessories

This kit includes everything you need to get you up and running immediately. Along with the splicer, you also get the 3-hole miller pliers, fiber cleaver, and fiber stripper. Additionally, it comes with a cooling tray, brush, cotton swabs, 100 heat-shrink tubes, an alcohol bottle, an air blower, and extra electrodes. For the best splicing results, these instruments assist you in cutting, cleaning, maintaining, and protecting fibers.

The carrying case keeps everything secure and well-organized. Without losing any tools, you can transport the set to different job sites. You can work more quickly and purchase fewer parts with this full configuration. It simplifies and expedites the splicing process by covering every stage from beginning to end.