VEVOR Condenser Fan Motor with Capacitor, 1/4HP 825RPM 208-230V, Compatible with GE Genteq 5KCP39LFBE31S 5KCP39LFY534AS, Lennox 12Y65 (92W75), Carrier HC39GE242 HB39GQ232, Amana Janitrol 0131M00014PS

Condenser Fan Motor and Capacitor Made to OEM Standards for Dependable Cooling

This VEVOR condenser fan motor and capacitor meet OEM standards across all key specifications. It works with 208–230V AC, has a rated current of 1.4A, operates on a single phase, and has a frequency of 60Hz. It gives stable, consistent performance that meets factory standards. Homeowners and HVAC techs get a unit that works exactly as the manufacturer intended, without compromise or guesswork.

The motor has an insulation class B rating, which means it can withstand sustained thermal stress over long periods. It is only 5.63 x 5.63 x 8.46 inches, weighs 12.35 pounds, and remains compact while delivering full power. With this update, you can count on it to work reliably from the very first start-up.

1/4HP 825RPM Power Output for Consistent Airflow and Efficiency

At 1/4 HP and 825 RPM, this condenser fan motor and capacitor provide the condenser unit with the right amount of power for airflow. The rated speed ensures that the fan blade moves enough air to keep the cooling cycle running properly. This feature keeps the system from working too hard in the middle of summer. This power-to-speed ratio is exactly what residential and light-commercial HVAC condensers need.

The rated current draw of 1.4A keeps energy use low while keeping the full rotational torque. Because it has only one phase, the electrical connection is simpler, and this motor can be used with standard home power supplies without any extra wiring. When technicians install this unit, they get a motor that starts up reliably, maintains the same speed even under load, and helps keep operating costs down over its lifetime.

Wide Compatibility That Fits Goodman, Carrier, Lennox, and GE Genteq Units

Replaces Goodman Amana Janitrol 0131M00014PS, Lennox 92W75, and 100483-43, and YSL YSLB-220-8-B002 condenser fan motors straight. It also works with the A.O. Smith F48AA68A50, making it one of the most versatile direct-replacement choices in this motor class. When contractors stock this unit, they can handle a wide range of service calls without ordering multiple SKUs.

The Carrier HC39GE242, HC39GE242A, and HB39GQ232 models are also compatible, as are the GE Genteq 5KCP39LFBE31S and 5KCP39LFY534AS models and the Lennox 12Y65 models. Because of this wide cross-compatibility, you can finish the job faster and spend less time checking part numbers. This motor fits into the systems you see most often, whether you work on residential homes or business HVAC fleets.

48Y Frame Design with Reversible Rotation for Flexible, Easy Installation

The 48Y frame standard ensures that this motor can physically fit into the mounting brackets of suitable condenser units. The shaft is 3.42 inches long and 0.5 inches in diameter, which is the right size for the fan blade it supports. With these exact measurements, you will not have to worry about adapters, and the installation process will go much faster.

The installer can set up the motor to rotate in both counterclockwise (CCW) and clockwise (CW) directions, allowing it to match the pitch of the existing fan blades without needing a replacement that only works one way. Technicians can make clean wiring connections inside most condenser cabinets with the 47-inch wire that comes with the unit. Standardizing the frame, ensuring the shafts are the right size, and including the wiring makes the installation process easy for any qualified technician.

Pure Copper Coil and Stainless Steel Bearings for Long-Term Durability

VEVOR makes this motor with a pure copper coil that efficiently converts electrical energy into mechanical rotation and prevents heat buildup during long run cycles. In terms of both conductivity and thermal management, copper windings are better than aluminum ones, thereby extending the motor’s useful life. This feature is the type of internal design that sets a good replacement apart from a cheap one that will not last long.

Stainless-steel bearings support the rotor shaft and do not rust, even in outdoor condensers where dirt, moisture, and temperature fluctuations impose constant mechanical stress. The motor also has overload protection and an automatic reset feature that helps prevent a short-term power surge or thermal event from permanently damaging the unit. This safety feature activates and resets itself automatically, so the system stays up and running with little downtime.

Condenser Fan Motor and Capacitor Combo That Eliminates Extra Purchases

To replace a broken condenser fan motor, you always need a new capacitor. But sourcing them separately wastes time and costs money for each service call. VEVOR includes one capacitor in the box, so when techs arrive at the job site, they have everything they need to complete the job. This bundled approach reduces the steps required to buy the item and eliminates the risk of mismatched capacitor specs.

The capacitor that comes with the motor helps it start quickly and reliably, and it can handle the power requirements of a 208-230V system without issue. The motor and capacitor are designed to operate in any weather and can handle temperatures up to 40°C, so they will still work in hot outdoor settings. This complete package of a condenser fan motor and capacitor gets systems back up and running quickly, so you do not have to make extra trips to get missing parts.