VEVOR 3000 lbs Electric Winch, 12V DC ATV/UTV Winch with Φ3/16 in x 39.4 ft Steel Wire Rope & Wired Remote Control, IP55 Waterproof, Aluminum Housing Fairlead Mount Plate for Towing ATV, Black

VEVOR Electric ATV Winch 3000 lbs 12V DC for Off-Road Recovery & Towing

The VEVOR electric ATV winch gives ATV and UTV users a reliable, powerful way to get out of sticky situations in mud, sand, steep hills, and other tough off-road obstacles without outside assistance. A 3000 lb pulling capacity is enough to handle the full weight of most ATV and light UTV recovery situations. It’s strong enough to free a stuck vehicle, drag logs, or help with everyday jobs around the farm or property.

This electric ATV winch works with your vehicle’s built-in 12V DC power system, so you don’t need to add any extra power or get a new battery for most ATVs and UTVs. The kit includes steel wire rope, a winch, a fairlead, a mounting plate, a wired remote, and everything else you need to set it up and use it right away.

1.3 HP Permanent Magnet Motor with 153:1 Gear Reduction for Maximum Pulling Torque

This electric ATV winch features a 1.3 HP permanent-magnet motor that delivers steady power. This means it can keep pulling strongly during long recovery operations without overheating or losing torque under load. Series-wound motors are less efficient and less stable than permanent magnet motors. This makes permanent-magnet motors better for off-road recovery, which often requires heavy pulling at different times.

The high gear reduction ratio of 153:1 turns the motor’s high speed into the mechanical power an ATV or UTV needs to get out of deep mud or up a steep hill. This gear ratio gives the motor the mechanical edge it needs to pull 3000 pounds. It does this by turning electrical input into usable pulling force as efficiently as possible across the full range of recovery loads.

Electric ATV Winch with 3000 lbs / 1360 kg Rated Pulling Capacity for ATV & UTV Off-Road Recovery

The estimated pulling ability of 1365 kg (3000 lb) is enough to recover most ATVs and lighter UTVs. It gives vehicles enough force to get out of mud, sand, snow, and other soft terrain where wheel traction alone isn’t enough to free them. This rating is for single-line pulling, and using a snatch block doubles the mechanical edge for very tough recovery situations where the direct pull rating alone isn’t enough.

In addition to recovering vehicles, the winch can be used for everyday tasks like dragging downed trees, pulling fence posts, moving equipment on slopes, and performing farm or field tasks that require controlled mechanical pulling power. This electric ATV winch is a truly versatile outdoor tool, with a 3000 lb capacity that makes it perfect for these useful tasks.

Φ3/16 in × 39.4 ft Multi-Strand Steel Wire Rope for High Tensile Strength & Durability

With a thickness of 3/16 in (4.8 mm) and a length of 39.4 ft (12 m), the steel wire rope that comes with this electric ATV winch is long enough to connect to anchor points far away from your stuck vehicle without the need for extension straps. A single-strand cable of the same diameter is less likely to break when it comes to sudden shock loads than a multi-strand steel wire rope. This is because the construction twists many smaller wire bundles into a rope that distributes tension across multiple individual wires simultaneously.

In tough outdoor conditions, the steel construction resists abrasion and UV exposure. Steel wire rope firmly keeps its rated tensile strength over years of regular use. This makes it a good long-term choice for riders who use their winch a lot on rough terrain.

9.8 ft Wired Remote Control for Precise, Interference-Free Recovery Operation

The 9.8-foot wired remote control that comes with the winch lets you control it directly and reliably from a short distance while you’re recovering. You won’t have to worry about signal interference, frequency conflicts, or connection problems that can happen with wireless remotes in remote outdoor areas. The physical link between the remote and the winch ensures that pressing a button always results in a quick, reliable motor response, no matter the terrain, weather, or radio-frequency sources.

The 9.8-foot cable length allows operation from a short distance during recovery pulls. This gives you space to see the angle of the rope, check the safety of the anchor point, and change the direction of the pull without being in the snap-back zone. Because you can handle it directly and work from a distance, wired operation is best for close-range, precise recovery work.

IP55-Rated Waterproof Control Box & Aluminum Housing for All-Weather Outdoor Use

The IP55 rating on the control box indicates that the electrical components in the winch’s control system is protected against dust ingress and water jets under standard test conditions. This means that the electric ATV winch can work in rain, mud, stream crossings, and the splashes of water that come with off-road riding.

The IP55 protection keeps the control electronics working when you need a winch the most, not just in dry weather when recovery isn’t essential. The rigid, corrosion-resistant aluminum alloy housing covers the motor and drum assembly. It can handle trail impacts, brush contact, and the daily exposure to dirt, water, and debris that ATV accessories face.